Fat Pages Finale

Here are all of my fat pages, finally completed and adhered to their backing. I made a total of 122 (needed to enclose two extra). You can click on the photos to get a better view. This one was an overall shot of all them. Below I have posted a few of my favorite pages:

This was a big job, but I am definitely glad I pushed myself to do it. I now have a good grasp of this technique and plan to use it in a lot of my art. I will definitely use it in my collages that I am going to work on next.

The interesting thing will be seeing what I get in return. There will be 120 pages of different techniques mailed to me in the swap. I'll share some of those when I get them, probably sometime in March.

My goal today was to get these things finished, adhered to their backings and the directions posted on the back. I completed everything and they will go to the post office Monday. Stay tuned for the next project...

"Paris" Pages

After learning the lessons from batch one, I am ready to start with batch two of my fat book sheets. I'm starting with a 12"x12" muslin square. These will be cut into 4"x4" squares when they are finished. So, here are my supplies all ready to go (learned this lesson the hard way; see previous post).

I went through all of the steps and produced 5 sheets that I liked better than the first batch. Here are my top three pages: This first one was my favorite of the five.

This one was my second favorite. I liked the colors and the composition of both of these:

This one was ok. I could have used less of the tissue paper and more of the images, but it will be fine for the fat book:

For today's batches I am using magazine images, which is what Beryl Taylor used in her technique. So far, I have only used wallpaper on my pages. The magazine papers will be thinner and probably easier to glue down. I have to make 16 sheets of this fabric paper, so I have a lot of room for experimenting with the different papers. I have to make enough sheets to be able to cut 125 4"x4" pages. So, off to do batch 3. Stay tuned...

Sneak Peek

Here is a sneak peek at the first batch of my fat pages. I did a test run of two sheets that were approximately 14"x17", knowing I would have to cut them down to 4"x4" after they were finished. Not bad, but I did learn a few things that I will incorporate into the remaining batches. This shot is from the top of the sheet. The following photo is from an area I liked near the bottom of the sheet.

The process is very simple, yet a little time consuming. I learned about fabric paper in the magazine, "Cloth, Paper, Scissors". This technique was introduced by the artist Beryl Taylor. Her fabric paper was gorgeous!

You start with a piece of white or cream muslin, cut to the size you want, laid down on a piece of plastic (very important). You coat this with a glue/water mixture. Then, you add torn pieces of paper from magazines, wrapping paper, anything with images you like. As you add the paper into the glue/water mixture, you need to tap it down into the glue; make it part of the fabric. That is what I need to do a better job of in my next batches.

After you've placed all of your images where you want them, you coat the entire thing with another layer of glue/water. Then you add torn bits of tissue paper. You can stamp on it or not, but add it wherever you want to fill in some spaces. You can also leave a little bit of the fabric showing; it's up to you.

After you've adhered your tissue papers, you take some fluid acrylics or inks and paint over the whole thing. This helps unify all of the layers and gives a nice contrast. I watered down my fluid acrylics because they are very concentrated. Then you leave the whole thing to dry overnight. That is the most important. You have to wait until it is all dry.

The next day you simply peel the fabric paper off of the plastic. It will lift right off and then you have a sheet of cool fabric paper to use in your art! You can cut it up and use it in collages, you can sew on it (it is a fabric base), you can do whatever you like with it and it's your design! You picked the colors and the images. So, pretty cool, huh?

What I learned from the trial run:

1. Cut and tear your images up before you begin! I was frantically trying to rip and tear pieces of paper and place them into the glue. Duh! Have a stash ready. That way you can spend more time deciding where to place your images! Also, do the same with the tissue paper. Tear everything up before you begin. Right now I have bins of paper that I've prepared for the next run.

2. You really need to tap your paper down into the glue on the first step. I think some of my paper didn't get meshed with the fabric as much as I would have liked. Just bury the stuff in the glue.

3. The thinner you make your glue/water mixture, the smoother your fabric paper will turn out. If you would like a thicker feel to your fabric paper, don't add as much water to the glue. I used Sobo glue (a huge tube) and probably not enough water for my liking.

4. Water down your paint to get a more glazed look. Some of my paint went on too think and obscured the images I wanted to bring out.

So with all of these little lessons learned, now I can start the "real" pages. They will be planned better and hopefully will have a more pleasing look to them. By the way, I used this really cool wallpaper border for my Paris images. I bought it a while back on sale, knowing it would come in handy for an art project! I love images of the Eiffel Tower and anything Paris-related. So that is what I'm using for these pieces.

I've cut 15 sheets of muslin at 12"x12". Starting with a smaller canvas for each sheet will help the process go a lot smoother I think. You only learn by jumping in and doing. These are OK, but not what I would send out. I will probably cut them up and incorporate them into ATC's or some other smaller projects.

Stay tuned for round two...